FGS 1

geo-FENNEL GNSS-System

Set:

Included:

  • 750160
The geo-FENNEL GNSS Receiver FGS 1 is produced especially for working in challenging terrain.... more
Product information "FGS 1"

The geo-FENNEL GNSS Receiver FGS 1 is produced especially for working in challenging terrain.

It covers all available GNSS-Sources, such as GPS, GLONASS, GALILEO and BEIDOU or can be limited to specific sources by the user. The integrated anti-jamming capability makes it possible to work under difficult conditions.

The receiver is standardly equipped with Bluetooth, an integrated radio modem (Rx, Tx) and a 4G modem.

The system can be connected with other receivers easily and is supported by application software like Carlson SurvCE or MicroSurvey FieldGenius.

The intelligent design makes the FGS 1 a compact and lightweight device.

Dust / water protection: IP 67
ASCII: NMEA-0183 GSV, RMC, HDT, VHD, GGA, GSA, ZDA, VTG, GST, PJK, PTNL, AVR, GGK
Transmit power: 0,5 W
Integrated GSM: 4G modem
Positioning update rate: 1 Hz, 2 Hz, 5 Hz, 10 Hz, 20 Hz
5 LED indicating lights: Power, satellite tracking, differential data and data recording
Miscellaneous: Bluetooth®; V 4.0 protocol, work compatible with Windows 7®, Windows mobile® and Android®
Correction data I/O: RTCM 2.x, 3.x, CMR & CMR+ (GPS only)
Extended size: 15,8 x 7,5 cm
Serial port: 1 serial port (7-pin LEMO), baud rates up to 921,600 bps
Weight: 0,95 kg (with battery)
Operation temperature: -40 °C to +65 °C
Storage temperature: -40 °C to +85 °C
Humidity: 100 %
Shock and protection: Yes (survives a 2 m pole drop)
Power supply: 5-27 V DC, 3.1 W (at full use), 2 x 2,000 mAh Li-Ion
Primary data storage: 8 GB (up to 32 GB)
Radio modem (optional): Tx/Rx with full frequency range from 410 to 4702 MHz 4G modem
Positioning specifications Stand-alone: < 1,5 m RMS
SBAS: WAAS, EGNOS, MSAS, GAGAN
Initialisation reliability typically: > 99,9 %
GPS: L1, L2, L2C, L5
GLONASS: L1/L2
BEIDOU: E1, E5a, E5b
GALILEO: Yes, but not activated
Cold start: < 50 s
Warm start: < 30 s
Initialisation time typically: < 10 s
Positioning specifications static: horizontal 2,5 mm + 0,5 ppm RMS, vertical 5,0 mm + 0,5 ppm RMS
Positioning specifications SBAS: < 1 m 3D RMS
Positioning specifications real time kinematic: horizontal 8 mm + 1 ppm RMS, vertical 15 mm + 1 ppm RMS
Positioning specifications: horizontal 0,20 m + 1 ppm RMS, vertical 0,40 m + 1 ppm RMS
Positioning specifications code differential GNSS positioning: horizontal 0,25 m + 1 ppm RMS, vertical 0,50 m + 1 ppm RMS
Signal reacquisition: < 1,5 s
Eigenschaften: "FGS 1"
Dust / water protection: IP 67
ASCII: NMEA-0183 GSV, RMC, HDT, VHD, GGA, GSA, ZDA, VTG, GST, PJK, PTNL, AVR, GGK
Transmit power: 0,5 W
Integrated GSM: 4G modem
Positioning update rate: 1 Hz, 2 Hz, 5 Hz, 10 Hz, 20 Hz
5 LED indicating lights: Power, satellite tracking, differential data and data recording
Miscellaneous: Bluetooth®; V 4.0 protocol, work compatible with Windows 7®, Windows mobile® and Android®
Correction data I/O: RTCM 2.x, 3.x, CMR & CMR+ (GPS only)
Extended size: 15,8 x 7,5 cm
Serial port: 1 serial port (7-pin LEMO), baud rates up to 921,600 bps
Weight: 0,95 kg (with battery)
Operation temperature: -40 °C to +65 °C
Storage temperature: -40 °C to +85 °C
Humidity: 100 %
Shock and protection: Yes (survives a 2 m pole drop)
Power supply: 5-27 V DC, 3.1 W (at full use), 2 x 2,000 mAh Li-Ion
Primary data storage: 8 GB (up to 32 GB)
Radio modem (optional): Tx/Rx with full frequency range from 410 to 4702 MHz 4G modem
Positioning specifications Stand-alone: < 1,5 m RMS
SBAS: WAAS, EGNOS, MSAS, GAGAN
Initialisation reliability typically: > 99,9 %
GPS: L1, L2, L2C, L5
GLONASS: L1/L2
BEIDOU: E1, E5a, E5b
GALILEO: Yes, but not activated
Cold start: < 50 s
Warm start: < 30 s
Initialisation time typically: < 10 s
Positioning specifications static: horizontal 2,5 mm + 0,5 ppm RMS, vertical 5,0 mm + 0,5 ppm RMS
Positioning specifications SBAS: < 1 m 3D RMS
Positioning specifications real time kinematic: horizontal 8 mm + 1 ppm RMS, vertical 15 mm + 1 ppm RMS
Positioning specifications: horizontal 0,20 m + 1 ppm RMS, vertical 0,40 m + 1 ppm RMS
Positioning specifications code differential GNSS positioning: horizontal 0,25 m + 1 ppm RMS, vertical 0,50 m + 1 ppm RMS
Signal reacquisition: < 1,5 s
Supplied with: 1 x GNSS antenna FGS 1 1 x MircroSurvey... mehr
Supplied with:
  • 1 x GNSS antenna FGS 1
  • 1 x MircroSurvey Fieldgenius-Software or Carlson SurvCE-Software
  • 1 x field controller DC 6
  • 1 x USB cable for FGS 1
  • 1 x RS-232 cable for FGS 1
  • 1 x measuring tape 3 m
  • 1 x container
  • 1 x user manual

More about the product

If you need more information about the article, you will probably find it here:

Downloads

Viewed